To configure Remote Control for Answering Machine

Parent Previous Next

1.     In the left pane of the Venta Fax main window, click the small button to the right of the Script Editor button (see picture).

2.     In the menu, select the script you want to use for your Answering Machine (mailbox), for example 2mailbox script. The Venta Fax includes several standard scripts. You can also write your own scripts. To do this you should refer to the User Manual of the Venta Fax program.



3.     In the Script Editor window, in the menu select Actions, and then select Activate loaded script. Then close the Script Editor.



4.     In the Venta Fax main window, on the toolbar click Settings.

5.     In the Program settings window, click Folders and Files in the TreeView, and then click Service Files.



6.     Check Remote control script file option and select your script file for mailbox (in our example 2mailbox.vfa file). Click <Apply> button.

7.     In the Program settings window, click Reception in the TreeView, then click Automatic.



8.     Select and check Switch to remote control mode immediately after answering call option. This option allows to run the script immediately after the response to an incoming call.

9.     Click <Apply> button to save settings.


Using scripts, you can manage your voice mailbox remotely via DTMF tones. DTMF Detection function is supported by Fax Voip T.38 Modem.